Ideal for removing of stickers, seal and glue residues. Simple blade change by loosening the knurled thumb screw on the chuck. Practical storage syste...More
Ideal for removing of stickers, seal and glue residues. Simple blade c...
Load capacity vertical up to 14 kg. Creates an organised working area. For hanging up pneumatic impact drivers and cordless drills. 84 mm wide fork ...More
Load capacity vertical up to 14 kg. Creates an organised working area...
The holder can accommodate up to 4 adhesive weight rolls. Can be placed directly at the workplace. Makes work much easier and saves time. Rotatable. W...More
The holder can accommodate up to 4 adhesive weight rolls. Can be place...
For the assembly and disassembly of bearings. Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc.. Universal use f...More
For the assembly and disassembly of bearings. Ideally for silent beari...
Less risk of slipage due to automatically closing pulling arm. 8 length positions possible. Extremely robust spindle with inductively hardened thread....More
Less risk of slipage due to automatically closing pulling arm. 8 lengt...
Ideal for petrol and diesel engines in cars through to transporters. Fully insulated terminal clamps (1000 A). Integrated electronics protection. Char...More
Ideal for petrol and diesel engines in cars through to transporters. F...
For the quick and accurate testing of the acidity of the battery fluid, the antifreeze content and the AdBlue® additives. Can also be used for coolan...More
For the quick and accurate testing of the acidity of the battery fluid...
6 point. According to DIN 3319/ISO 6788. Sturdy design. Ideal for use with vans, commercial vehicles, tractors, agricultural and construction machines...More
6 point. According to DIN 3319/ISO 6788. Sturdy design. Ideal for use ...
Flank traction profile. According to DIN 3113 Form A / ISO 3318 / ISO 7738. Jaw 15° offset. Ring head 15° offset. Polished heads. Matt finish. Chrom...More
Flank traction profile. According to DIN 3113 Form A / ISO 3318 / ISO ...
Triggering accuracy: ±3% tolerance from the set scale value with clockwise tightening. Triggering accuracy: ±6% tolerance from the set scale value w...More
Triggering accuracy: ±3% tolerance from the set scale value with cloc...
Triggering accuracy: ±3% tolerance from the set scale value with clockwise tightening. Triggering accuracy: ±6% tolerance from the set scale value w...More
Triggering accuracy: ±3% tolerance from the set scale value with cloc...
Actuation accuracy: . Precise reading accuracy for a minimum 5.000 tightening cycles. For controlled fastening in clockwise and counter clockwise dire...More
Actuation accuracy: . Precise reading accuracy for a minimum 5.000 tig...
Robust loosening. Designed for use with the crank handle supplied. With integrated, adjustable support device. Square drive adaptor to DIN 3120 / ISO ...More
Robust loosening. Designed for use with the crank handle supplied. Wit...
13 mm Röhm metal quick-action drill chuck. 3-in-1 device with screwing, drilling and hammer drilling function. Powerful 60 Nm maximum torque. Up to...More
13 mm Röhm metal quick-action drill chuck. 3-in-1 device with screwi...
Square drive adaptor to DIN 3120 / ISO 1174. With an industrial hammer mechanism. Powerful 690 Nm tightening and loosening torque. Wear-resistant, br...More
Square drive adaptor to DIN 3120 / ISO 1174. With an industrial hammer...
With non slip soft grip handle. Air exhaust through the handle. Short anvil. With four-stage torque adjustment for tightening and loosening. Easy oper...More
With non slip soft grip handle. Air exhaust through the handle. Short ...
In handy pistol design. Air exhaust through the housing. For removing and/or derusting of coatings and solid metal parts. Is coarser than a sand balst...More
In handy pistol design. Air exhaust through the housing. For removing ...
Specially for the wheel assembly and/or dismantling. 6 point. Internal square drive to DIN 3121 / ISO 1174. Long execution. For machinery usage. Plast...More
Specially for the wheel assembly and/or dismantling. 6 point. Internal...
Suitable for wall mounting. Consists of filter pressure reducer, oil regulator and manometer. Inspection glass for fluid inspection. For the assembly ...More
Suitable for wall mounting. Consists of filter pressure reducer, oil r...
Pump body made from die-cast zinc. Pump bodies from steel. Suitable for 50 – 200 litre drums due to 2-stage connection thread. All steel parts with ...More
Pump body made from die-cast zinc. Pump bodies from steel. Suitable fo...
LCD display with backlight. Acoustic signal can be activated as an option. Individual distance measurement. Continuous distance measurement. Area meas...More
LCD display with backlight. Acoustic signal can be activated as an opt...
