Technical data: Chemical base: oxime silicone
Curing: at room temperature (RTV)
Components: single-component
Colour: black
Consistency: pasty, stable, permanently flexible when cured
Temperature range: -60°C to +280°C (short-term +300°C)
Maximum sealing gap: 2.0 mm
pH value: neutral
Electrical conductivity: insulating
Resistance to: oil, grease, coolant, UV radiation, cold and hot water, salt water, detergents, weak acids and bases, etc.
Possible areas of application: valve cover, oil sump, water and oil pump, differential housing, transmission housing, transmission oil sump, thermostat housing, control housing, axle cover, flange connection, headlight, rear light, battery box, etc.
Instructions for use
• Remove sealant residues and clean sealing surfaces using solvent
• Sealing surfaces must be clean, dry, and free of oil and grease before applying the sealant
• Apply sealant consistently and evenly. The pressing out speed can be controlled by operating the lever
• Remove excess sealant immediately to prevent it dripping in
• Assemble components according to the manufacturer's instructions
• Immediate sealing function
• Replace cap after use. All 3 adaptor screw connections should be screwed down tightly before reusing the productContainer: Aluminium can, 200 ml, nozzleDirko HT ProfiPress is a high-temperature silicone-based sealant. The product hardens when it reacts with moisture. The hardened sealant is permanently resilient. The product is characterised by its versatility. The pressurised gas system enables comfortable and professional application.
