Zinc spray

Special light version (colour the same as if the surface was hot-dip galvanised)

Container: 400 ml spray can

Technical data: Colour: corresponds approximately to RAL 9006 Areas of application: indoors and outdoors Binder: modified alkyd resin Pigments: flaky zinc and aluminium pigments Pigment purity: approx. 99.9 Zn / approx. 99.5% Al Metal content in the dry film: approx. 70% Specific weight: 1.0 - 1.2 g/cm³ Recommended primer: zinc spray Processing temperature: from +5 to +35°C (optimum +18 to +35°C) Consumption with 1.5 cross-coat approx. 150 ml/m² Layer thickness with 1.5 cross-coat approx. 30-50 μm Dust dry after approx. 15 min. Fully hardened after approx. 12 h Can be painted after approx. 24 h Abrasion-resistant Cross cut DIN 53151 / ISO 2490, cross cut value GT 0 to GT 1 Salt spray test ISO 9227 > 550 h Mandrel flex test DIN EN ISO 1519 no hairline crack formation Top coat not required Temperature resistance after complete hardening approx. -50 to +300°C Storage stability: 24 months